Skip to Content
 

Maybe I have a work-able solution, let me know!

9 replies [Last post]
questccg
questccg's picture
Offline
Joined: 04/16/2011

So let me explain the conundrum and see if ANYONE has some GOOD advice or ideas to help me out!

questccg wrote:
The problem lies with the fact that SOME abilities like SCRY work best during a round (local resolution).

But OTHER abilities like ABSORB DAMAGE work best when all Monsters are revealed and there is interaction in the play area (global resolution).

Two important things:

1. local resolution is SIMPLER (there are a maximum of 3 Monsters per side to contemplate about).

2. But global resolution is more STRATEGIC because you can better use your Ability Pools more effective (you see ALL 6 of the Monsters in play).

So outcomes of Global Resolution is that it may lead to a bit of analysis-paralysis. But Local Resolution is less strategic and HARD to plan with (because you can't predict the Monsters the opponent will play).

Have I made this CLEAR enough??? Are my examples EASY to understand?? Do you have any IDEAS you are willing to share?

Thanking all that respond in advance... Cheers!

questccg
questccg's picture
Offline
Joined: 04/16/2011
Let me clarify a bit...

There are three (3) "Population Rounds":

1. Play three (3) Monsters

2. Play two (2) Monsters

3. Play one (1) Monster

So the question is... After EACH ROUND (local resolution) do I add a BATTLE Phase...? For Abilities like "SCRY 3 topmost Monster in your deck" means you take a peek at the 3 topmost cards and figure out IF you want to KEEP some of them ON TOP and which to place AT THE BOTTOM.

This could be VERY important if you are waiting on a "clutch" card in Round #3 for example... So you would play the Monster with SCRY in Round #2 and resolve it immediately before moving on to Round #3.

Very interesting, strategic and useful too!

If we go with battling at the END of all "Population Rounds" this would be like a Round #4: Battle!

This means that each player's Monsters are VISIBLE to them. There is no need to say: "Hmm... Maybe I should save some points for future rounds...?" And therefore the Planning is unnecessary because you use your points during Round #4... (During Battling which goes back-and-forth).

This makes total sense for ABILITIES which Interact with OTHER Monsters. Let's say I have a Monster who can ABSORB DAMAGE from an attack of an ADJACENT Monster...! Locally it is pretty useless as an ability. I mean at most you can absorb damage for 2 cards (Left and Right).

But globally you can expand this and maybe be capable of absorbing damage for 4 of your cards in play! So this ability is more interesting GLOBALLY.

Now I guess I could do BOTH. But again this can lead to POOR planning... IDK it doesn't "feel right" TBH. Maybe there is another alternative that I am not seeing...? Or something CLEVER that I have yet to think about which could offer me a solution to my dilemma(?!)

Anyhow if anyone has questions, comments, suggestions, feedback please feel free to ask away and I will do my best to answer you.

Cheers all!

Juzek
Juzek's picture
Offline
Joined: 06/19/2017
Are the abilities tied to a

Are the abilities tied to a card in your hand? or are they part of the monsters?

If you are playing abilities from your hand, you could quite simply state on the card when is an appropriate time to play it such as "Reaction" or "Any time" or "Turn Start" or just add language describing it's application.

If its on the monsters themselves, I'd recommend making a symbol system that has the effect, and when and where it applies.

I do understand that a consistent ruleset will make it much easier for players. Is there a way to achieve the same sort of outcome with a different thing? like instead of a scry, maybe one monster lets you play with the top card of your deck revealed as a constant effect.

What you're trying to avoid is people forgetting to do their special things cause the particulars are too difficult to keep track of.

questccg
questccg's picture
Offline
Joined: 04/16/2011
No bearings on your thoughts... But...

I am thinking that the "Mathematical Equation" (Formulae) should total up to ZERO (0) Points. Otherwise things like "Minus -" or "Division /" are obviously not to be applied in the event that the HIGHEST score wins.

So if you have a Value of 9 and an Division by 3... 9 / 3 = 3 points.

Makes much more SENSE now to use a Division. Add to this a -3... 3 - 3 = 0.

Again making use of a subtraction operation. This hasn't really solved my issue. But it solved another one of my issues with various operators that seemed defunct because of the Victory Goal.


And to answer @Juzek's question: the abilities are on the Monster cards themselves. I don't want to share the card layout ATM ... Because it is a VERY Novel Card Design... The reason for me to continue with this DESIGN ... Is because every time I look at these cards, I think: "Hmm... These cards are cool and have much potential!"


I want to stick away from symbols and prefer explicitly listing the abilities on each card. It's much easier to read an ability than memorize it's symbol. Plus I have 15 Monsters each unique. I don't want 15 symbols, or one for each of the Monsters... When you view it that way, it's clearer with the ability as a description.

I also want to have a DESIGN that is "tight". What I mean is having operators for NO REASON blows. If you are NOT going to use some of them and only boost your deck with Additions (Plus +) for achieving the HIGHEST possible score is a bit TOO FAMILIAR.

But achieving a ZERO (0) as a form of balance... Sounds much better!

Let me think about it some more... And of course, other comments welcome too.

questccg
questccg's picture
Offline
Joined: 04/16/2011
Instead of ZERO (0)

I have another approach that may be more sensible: roll 3d6s (White) to determine the TARGET score by the formulae. This means 16 values starting at 3 all the way up to 18. That could provide more variability between ZERO (0) and HIGHEST score because it's in a RANGE. Otherwise players would never use MINUS (-) or DIVIDE (/) operators because this obviously LOWERS one's score. And WHY(?!) would you want to lower your score if the goal is getting the HIGHEST possible score?!?!

My new list of operators are now: Add, Subtract, Multiply, Divide and Exponent.

No values of zero (0) are permitted. If a Monster has zero or less health, that card gets flipped over avoiding the DIV/0 (Undefined). Same goes for MULTIPLY by 0 (= 0) which is also very bad in most cases (since it equals zero). So all those cases have been resolved.

So this is the positive outcome from yesterday's rehashing of my problems with this DESIGN. More to come, next is the discussion about COMBAT. What's come out of the possibilities to think about how to work the mechanics.

questccg
questccg's picture
Offline
Joined: 04/16/2011
More about the operators

While Add and Subtract are VALUE-Based operators, Multiply, Divide and Exponent are NOT. Meaning Multiply, Divide and Exponent by 1 all result in a stalemate of the VALUE (as computed in the formulae). This is good because they are NEUTRAL when it comes to using them for computing; meaning worst case you make your operand "1" and nothing changes.

That's very cool and valuable in a game where you are trying to compute a specific VALUE (in the 3 to 18 range). Sometimes lower scores impact the game LESS in that there are less resources to go around and therefore impacting the Monsters less ... What I mean you can impact the opponent's stack less because you don't have sufficient resources to make a deep impact (like exiling a card because it has dropped to 0).

BTW exiling means that the Monster gets flipped over and no longer has an impact on the formulae (scoring round). Simply that "Monster is exiled" and has no value or consequence when computing the overall score given the remaining Monsters/cards.

questccg
questccg's picture
Offline
Joined: 04/16/2011
Exponent operator

More on this... This is a NEW addition because it falls into y^1 = y or y^2 = y x y. With relatively low numbers the exponent operator is MANAGEABLE. But in the context of getting the "HIGHEST" possible score, that operator is too extreme because of things like y^3 or y^4 = y x y x y or y x y x y x y... Plus Players would load their decks with THREE (3) of cards and have them CHAIN to make impossibly HARD to compute values. I want simple MATH!

Not ((5^4)^3)^2+1)!!! Aghh! So complicated! = 59,604,644,775,390,626... Hahaha!

CRAZY SHIT! Would BREAK the game. Impossible to compute without a calculator. And just NOT REALISTIC either! But 4^2 = 16 or 2^3 = 8 ... Small values are manageable. So things like (2^3)/4 = 2... Are reasonable computations!

So this was a bit of look into this NEW "operator" because I felt like MULTIPLY and DIVIDE, this operator can be used for low computation fairly easy too!

questccg
questccg's picture
Offline
Joined: 04/16/2011
Okay so maybe I have some good ideas, maybe not!

My IDEAs are something like this:

1. Play 3 Monsters into Level 1 Position (first row).

2. Play 2 Monsters into Level 2 Position (second row).

3. Battle between all 10 Monsters in play (5 each side).

4. Play 1 Boss Monster into Level 3 Position (third row).

5. That Boss can attack the opposing two (2) rows (Level 1 & 2).

Now for some observations.

When the Battle Round first ensues, there already is a MAJORITY of Monsters in play (5 out 6). The only one left is the BOSS. This is a bit more flexible and perhaps not as "straight-forwards" as my original concept. But it does impact the game and make it MORE strategic.

Next when the Boss is played... The Boss CANNOT be attacked directly. He also has the capacity to attack ANY of the opponent's Monsters on the first two (2) Levels (1 & 2) but not the opposing Boss.

This using something like a SCRY can give your Boss a lot of POWER to make an impact into the opposing player's stack of Monsters. Again the majority (5 out 6) which is pretty reasonable IMHO.

So the Boss is a bit special and we have two "combat" rounds in the game. This is very much a COMPROMISE in terms of what I had originally and what I am now proposing. As you can see, it is a rather CLEVER solution which is sort of a HYBRID of Local vs. Global Resolution. And it makes some sense cases to leave some Mana for your Boss (if you have a good idea which Monster you will play into that position ... And therefore understand his impact) or ignore the Boss altogether and focus on the 1st Round of Combat (Level 1 & 2) only.

To me this solution seems like the BEST possible "compromise".

It allows for a more sensible population of the Monsters (5 out of 6) and gives you much forethought into what YOUR Boss is going to be in the 3rd Population Round. Battles are more strategic and also allow for planning with the Boss Monster.

This seems like a solution to a "complex" problem... It is not too "out-there" but it does take into the fact the model (Monsters, Levels and Abilities) for the game and makes it a less RANDOM solution. I get the impression that much thought was put into this "outcome".

What do you think???

Does this all sound more reasonable? Do you think there are other options?? And if you do, please feel free to share with me your feedback and comments.

This is rather NEW as a solution, so it's going to take me some time to absorb it and see if there are any issues with it.

Cheers all!

questccg
questccg's picture
Offline
Joined: 04/16/2011
Some additional ideas

Well I was thinking about how the HEALTH of a Monster impacts the "Operand"... One of my thoughts were that as you battle an opposing monster, the health lowers and that would mean you could have 1 to 2 as an Operand, instead of 1 to 3 (for example).

I thought about this for the last couple days... And it clearly meant that the opponent could "prevent" his opponent from using HIGHER SCORING values. But this wasn't enough... Basically I could use all "1"s and then there would be NO point in the "battle" rounds and the effect upon the Monsters.

Today I came up with a NOVEL idea:

Why not allow for points to be removed from either side of the health meters!

So "1" and "2"s can be removed ... But a "3" can REMAIN as the sole "Operand"... Meaning a player would be forced to use the "3" Value for that Monster...

This makes 100% sense... As the value vary in importance as per the OPERATOR!

For example, let's look at some cases and see their impact:

1. Add Operator (+): If I have values 1 to 4... It makes sense to work on the RHS and lower the effectiveness of the operator. Meaning "4" could be removed, allowing values 1 to 3 to remain.

2. Multiply Operator (x): Again if I have values 1 to 3... I may want to trim off "3" and then "2" to limit the efficiency of the multiplicate to only "1"!

I'm not saying that this will prevent the opponent from reaching the designated Score Total ... But it presents an interesting opportunity to the Players to "mess" around with their opponent's Monsters.

My earlier assumption was that the opponent could "damage" an opposing Monster. Let's say it was a "3" value Operand. So the opponent could force it to be "2" OR LESS (as per my earlier thoughts). If the opponent was wanting to use that monster as a "1", the ATTACK would be for nothing as he would need to reduce the monster to "0" if he wanted to limit the use of this monster.

And that seems "DUMB".

But now having the opportunity of removing WHATEVER Point Value you want... Make so much more sense... If I have a "6" and my opponent is looking to get a "5", I can attack and deal a "5" of damage... So my values would go 1 to 4 and "6" ... no "5".

Again this is CLEVER thinking... And was not apparent in the original design. But NOW it makes much more sense! I will try to figure out how to DOCUMENT this new way of "battling"... Because it adds to an interesting outcome.

Cheers all!

Note #1: The COOL thing about this NEW method of "Battling" is that it allows you to TARGET a SPECIFIC "Value" you want to remove from your opponent's CHOICES! This is GREAT because let's say you've been doing a LOT with "3" and you have a lot of "3s" and "9s", and then you have a DIVIDER. The opponent could TARGET the "3" forcing you to either use "1" to remain the same.

And if your opponent targets your "1" TOO... You have a "2" or a "4" that remain... Neither of which WORK for your "3s" or "9s"... Meaning you would need to figure out some ALTERNATE scoring and maybe dump your planning and go with something completely different (when scoring the formulae).

To ME, that sounds COOL! I like games that allow you to MESS with your opponent's plans and force them to re-think their strategy!

questccg
questccg's picture
Offline
Joined: 04/16/2011
Anyone else agree with that sentiment???

Do you also like games that DIRECTLY MESS with your opponent's plans??? Not like Ticket To Ride where you might stumble upon a track that your opponent required, no this is actually battling the RIGHT Monsters and leaving the opponent in quite "the pickle" where he/she needs to re-adjust their strategy to comply with the odd nature of the Monsters in-play!?

Please let me know in a comment other games that do something similar! Or give me some questions/comments/feedback concerning the approach and if you see any ways that it could be problematic.

Cheers all!

Syndicate content


forum | by Dr. Radut